The smallest Mini ITX cases are the safest bet, especially if you’re new to PC building. You don’t need to rob a bank to start one. They don’t take up a lot of room in your workspace and are far more portable than an ATX case. It does, however, have certain restrictions. Some hardware compatibility must be sacrificed (e.g., Many mini-itx cases have no graphics card slot).
However, with the appropriate components and the tiniest mini-ITX boxes, you can create the PC of your dreams on a budget. Roll the drums… The greatest smallest Mini-ITX cases to buy in 2022 are listed below.
Raven Z by SilverStone – Best Portable
Nothing compares to the SilverStone Raven Z in terms of aesthetics and performance. A matte black finish and aggressive sliding plastic panels are included. Raven Z is one of the smallest and lightest Mini-ITX cases available. The system’s front panel has a unique cutout design with RGB lighting streaming through it. The front i/o port is located at the bottom, taking advantage of the limited space.
The cooling and ventilation capabilities are outstanding. It contains everything you need to run a 4K gaming system while being compact and cool. For exhaust overflow, there is minor ventilation at the top and bottom of the case. As a cooler to the fan, there is more noticeable ventilation on the side.
Raven Z is lightweight and may be used both vertically and horizontally. As a result, there are no optical drive bays on the Raven Z. However, it still manages to fit all of your components within. The graphics card is located too close to the floor in this case, which isn’t ideal given the case’s lack of extended footing.
Read More: When Should Your Old Monitor Be Replaced?
The Thermaltake Core V1 is the best airflow Mini-ITX case on the market
Mini-ITX cases have a limited amount of ventilation, which is one of their major drawbacks. This is often detrimental to expensive PC components, particularly the graphics card. That isn’t the case with the Thermaltake Core V1, a tiny box with outstanding ventilation and cooling.
The 200mm fan featured in this mini-itx cube container, as well as the perforated structure that allows heated air to escape while cool air enters, provide excellent ventilation. It also includes two 80mm back fans, which, be warned, can be quite noisy when running at the same time. Despite all of these features, the Core V1 is reasonably priced, with a retail price of just over $50.
We can’t talk about this Thermaltake case’s amazing design without mentioning it. It comes in two colours: black and white. It boasts a curved finish, a sturdy four-foot base, and a dual-rack design. The I/O panel is simply movable and adds to the chamber cooling.
Thermaltake offers a three-year warranty on this Mini-ITX case to give you piece of mind.
High-End NZXT H210i
The H210i is a descendant of NZXT’s bestselling H series white mini-itx casing. It is well-known for its sturdy exterior and futuristic look, as it is made of SGCC Steel. The I series, as expected, comes with a CAM-powered smart device that allows you to control your RGB lighting and fan speed.
NZXT is normally highly sought after – regardless of price – because to the amazing cooling ability they usually put into their cases. The NZXT H210i is no exception. You can nearly imagine what to expect with this build if you’re familiar with the NZXT H710i. Aside from the modest size, it has all of the interesting features found in the H700i.
Another appealing characteristic of this case is that it provides enough room for growth, in case the user’s PC components grow in the future. At the back, there is tempered glass. You also get superb water cooling support.
The Cooler Master RC-130 Elite is the best budget option
In the early 2000s, this was one of the first Mini-ITX cases to hit the market. It’s only making an appearance in a 2022 list because it’s been significantly enhanced to compete with today’s greatest Mini-ITX. This is designed to assist you with transporting some serious PC components.
The design, on the other hand, is still a little studied and old school. Despite this, the Cooler Master RC-130 Elite continues to impress in terms of performance and portability. The Cooler Master RC-130 Elite is a fantastic choice if you want a setup with plenty of airflow. The design features a mesh front panel with rectangular holes that allow cool air to flow in while heated air exits the system rapidly.
The only drawback is that it lacks dust screens, thus your case must be cleaned on a regular basis or it will become extremely dusty. It can fit both blower-style and full-length graphics cards due to its large interior space. For even more air, you may install a second 80mm fan at the top.
Crystal 280X RGB from Corsair
Have you simply raised your brows? This Corsair case, on the other hand, is large enough to fit Micro-ATX and Mini-ITX motherboards and GPUs. You can’t say no to additional space, right? That’s what the Corsair Crystal 280X has to provide.
It has a cute design with three tempered glass panels that enable us peek inside your chassis. The Corsair Crystal 280X is the largest of the smallest mini-ITX cases we tested, which explains its generous amount of space.
It has PSU filtering, as well as provision for water cooling if desired, thanks to its two chamber design. It also comes in handy for excellent cable management. A lighting node Pro controller is included, as well as a handful of pre-installed addressable RGB fans. The Corsair iCUE programme can control this.
TU150 Lian Li – Best Overall
In 2022, the Lian Li TU150 is the best tiny mini-itx case. It provides outstanding ventilation for an ITX case without compromising its compactness (Neither too big, nor too compact.) It’s encased in 1.5mm brushed aluminum plates, which give it a flawless metallic finish.
The side panel is made of 3mm tempered glass and includes clippable corners for easy disassembly. With a retractable handle and a weight of 11.58 lbs, it is incredibly portable. The front panel features angular sides with enough ventilation to allow air to flow through.
The side panel also provides ventilation for the PSU, which is placed at the top. Aside from the amazing look, the fact that it can attach up to four fans means you’ll only get good airflow. Despite its diminutive size, the Lian Li TU150 features a dual fan design.
The InWin A1 Plus is the world’s smallest Mini-ITX case
Before we get into performance, the opulent design of In Win cases is the first thing that catches the eye. It’s much more appealing because of its white/black appearance. That’s exactly what the In Win A1 Plus proved to be. Aside from its flashy style and tiny size, the A1 Plus has a few more appealing characteristics. Take a peek around.
The side panel is tinted tempered glass with protruding nobs for easy access to the insides. A1 Plus is an InWin A1 upgrade featuring RGB fans and various hardware improvements. A pre-installed PSU with two GPU connectors is included in this Mini-ITX case. As a result, it’s a fantastic cable management option.
In addition, there’s a 650W power supply, which should be enough to power a small gaming rig. The Qi wireless charging is the final important feature we’ve mentioned. This clever charging station not only charges your phones wirelessly, but it also charges your PC when it is turned off.
Read More: Best Browser For Windows 11
The NZXT H1 is the best gaming mouse
Aside with the H210i, NZXT also unveiled the NZXT H1, a premium small form factor gaming case. This case is specifically created for a committed gamer who does not want to forfeit their workstation, despite its costly price tag.
Like all previous nzxt cases, the H1 features a modern, clean appearance. The tinted glass on the front panel reveals the tidy inside. The vendor promised airflow, and it delivered. Covered with a ventilated metallic panel, it has enough air to breathe.
Even in its compact shape, the insides contain a distinctively split compartment that makes every aspect of your project easily accessible. The pricing is affordable because it has its own power supply, fan, and other necessary components.